Product

Rodent Control Products > Mole Traps


RACO Claw Mole Trap:

Highly effective and successful mole trap designed and used by professionals. Triggered by the moles natural soil clearing upwards action. Double entry mole traps allows access from either side of tunnel. A must in the pest controller’s armoury.

 

Setting Trap

1)     Slide the trigger plate into centre of trap in line with setting arm.


2)     Squeeze the trap together so the claws are in open position. Pull the setting arm over and insert into hole in trigger plate.

3)     Gently release pressure, letting setting arm take spring load. The trap is now set.

 

 

How to use

1)     Look for signs of mole activity such as fresh earth on mole hills. Do not place trap in a mole hill, but prod ground close by with stick to find a run.

When the stick push’s through soil it will indicate a tunnel. Use a finger to see which way tunnel runs.

2)     Place trap on top of ground in line with direction of tunnel. Mark out area around trap using a knife and remove turf and soil to expose tunnel.

3)     Place set trap firmly into soil with trigger plate just above the bottom of tunnel.

4)     Sprinkle a small amount of soil into tunnel and around the trap and trigger plate, then place the turf back over to block any light entering the tunnel.

5)     The mole will think the tunnel has collapsed and try to clear the soil. It’s natural up movement will trigger the plate and set off the trap.

6)     Remember to mark location of traps.

7)     Please check daily.


Tips

 1)     Rub soil over trap before use to remove scent.

2)     Never wash a trap that has caught a mole

3)     Rub the scent off caught moles into the tunnels of other moles and place trap.


CODE Description
RACO1096

Outer
Raco Claw Mole Trap

6 per case

 


 

RACO Mole Scissor Trap:

Very popular and highly effective mole scissor trap. Double entry trap allows moles access to the trigger plate from either side of tunnel. Easy set Long handles for safe grip and instant monitoring of triggered traps.

Setting Trap

1)     Squeeze two handles together so jaws are in open position.

2)     Place trigger plate in between the 2 clasps very carefully and gently release the handles letting the plate take pressure of spring load. Be careful fingers are not in jaws of trap when setting.


How to Use

1)     Look for signs of mole activity such as fresh earth on mole hills. Do not place trap in a mole hill, but prod ground close by with stick to find a run. When the stick push’s through soil it will indicate a tunnel. Use  a finger to see which way tunnel runs.

2)     Place trap on top of ground in line with direction of tunnel. Mark out area around trap using a knife and remove turf and soil to expose tunnel.

3)     Place set trap firmly into soil with trigger plate just above the bottom of tunnel.

4)     Sprinkle a small amount of soil into tunnel and around the trap, then place the turf back over to block any light entering the tunnel.

5)     The mole will think the tunnel has collapsed and try to clear the soil and set off trigger plate. You can also try without soil, but make sure no light enters the tunnel.

6)     Remember to mark location of traps.

7)     Please check daily.

Tips

1      Rub soil over trap before use to remove scent.

2      Never wash a trap that has caught a mole

3      Rub the scent off caught moles into the tunnels of other moles and place trap.


CODE Description
RACO1095

Outer
Raco Scissor Trap

12 per case

 


 


RACO Tunnel Mole Trap:

Also known as the ‘DUFFUS’ or ‘BARREL’ mole trap. Another fantastic trap for catching those unwanted garden pests. Double entry trap catches and humanely kills mole from either side as it passes through the tunnel.

 

Setting Trap

1)     Push the strangle loop down from the top whilst careful placing setting arm into setting hook.

2)     Repeat the process on other side of trap. The trap is now at full set.

 

 How to Use

1)     Look for signs of mole activity such as fresh earth on mole hills. Do not place trap in a mole hill, but prod ground close by with stick to find a run. When the stick push’s through soil it will indicate a tunnel. Use a finger to see which way tunnel runs.

2)     Place trap on top of ground in line with direction of tunnel. Mark out area around trap using a knife and remove turf and soil to expose tunnel.

3)     Remove any loose soil in tunnel and place trap set trap into the tunnel.

4)     Careful fill any gaps around the sides of trap, so not to leave any air pockets. Cover the trap with a light sprinkle of loose soil to block out any light entering the tunnel.

5)     Remember to mark location of traps.

6)     Please check daily.

Tips 

Rub soil over trap before use to remove scent.

Never wash a trap that has caught a mole

Rub the scent off caught moles into the tunnels of other moles and place trap.

 

 

CODE Description
RACO1099

Outer
Raco Tunnel Mole Trap

24 per case

 

 

Lodi UK Ranges

Rodent control products »
Insect control products »
Phobi insecticides »
Grain protection »
Disinfectants »
Application equipment »
On farm fly control »

Quick Links

Get Closer

follow us follow on Facebook follow on twitter